how do I reinstall IIS 7 and what ever else it needs. I am running win 7 x64 sp1
↧
not sure
↧
Unable to run the batch file using task scheduler to create mapped drive using two different domain usernames
I logged the windows 2000 server with username (xxxx) with domain (ABCD),
I want to mapped drive with username (xxxx) with domain(WXYZ). username is same but server logged domain and mapped drive domain is different.
I created batch file and written below in the batch file
"net use x: \\server\share /user:domain\username password
(net use x: \\myserver.sbc.com\app /user:wxyz\xxxx yyyy)".
I ran the batch file manually and it is working fine. But when I ran the batfile using task scheduler it can't created mapped drive.
Please find below steps that I followed.
1. Add Task scheduler.
2. Browse the file (C:\mapdrive.bat)
3. Start in (C"\)
4. Run as Domain\username (abcd\xxxx)
5. Schedule task (daily)
6. Power Management ( checked "Don't Start task if computer is running on batteries"
Checked "Stop the task if batter mode begins.)
7. Given full control access to local domain (abcd\xxxx) and administrator)
8. Run the task scheduler but It can't work.
I have changed the Run as filed as Domain\username (WXYZ\xxxx) but still I can't mapped drive. Please assist on this issue.
I want to mapped drive with username (xxxx) with domain(WXYZ). username is same but server logged domain and mapped drive domain is different.
I created batch file and written below in the batch file
"net use x: \\server\share /user:domain\username password
(net use x: \\myserver.sbc.com\app /user:wxyz\xxxx yyyy)".
I ran the batch file manually and it is working fine. But when I ran the batfile using task scheduler it can't created mapped drive.
Please find below steps that I followed.
1. Add Task scheduler.
2. Browse the file (C:\mapdrive.bat)
3. Start in (C"\)
4. Run as Domain\username (abcd\xxxx)
5. Schedule task (daily)
6. Power Management ( checked "Don't Start task if computer is running on batteries"
Checked "Stop the task if batter mode begins.)
7. Given full control access to local domain (abcd\xxxx) and administrator)
8. Run the task scheduler but It can't work.
I have changed the Run as filed as Domain\username (WXYZ\xxxx) but still I can't mapped drive. Please assist on this issue.
↧
↧
Server Manager showing "FTP-SERVER-Online - Access denied" error
Windows Server 2012 r2 Server manager showing the following error when trying to refresh it
"FTP-SERVER:Configuration refresh failed with the following error:Access is denied"
INFO:
I log on as Local Administrator
Managing the Server Locally with the local Server Manager
There is no Event log error or Error Code in the server
↧
Disabled Account Message
When I disable an account and the user tries to log on, they get the following message:
Your account has been disabled. Please see your system administrator.
Is it possible to customize this message? If so how?
Thanks,
Kevin
↧
how to remove the popup showing at the time of users logon. "the procedure entry point K32GetProcessinfo could not be located in dinamic link library KERNEL32.dll"
Hello,
i am getting popup at the time of login in server "the procedure entry point K32GetProcessinfo could not be located in dinamic link library KERNEL32.dll" . please let me know how can i remove it so that the same should not popup at the time
user login in server.
Thanks,
Masud Hussain
↧
↧
Unable to run the batch file to create the Mapped Drive.
I want to run the batch file to create the Mapped Drive (M:) using Task Scheduler inwindows2000. But I am unable to run the batch file and not able to create Mapped Drive. I logged the machine with local username/password and need to mapped drive with another Username/Password.
Is it possible to run the batch file using task scheduler with two different domain username/Password inWindows 2000.?
I am able to run the batch file manually, But unable to create mapped drive using task scheduler.
↧
Window Server 2012 Can't get role and feature data Error_Unable to obtain feature list Error.0x8000ffff
Hi there,
Problem: Im not able to install any role and features on my Windows Server 2012 , Managablity showing RED
Windows could not search for new Updates It Fails to Update
Role and feature refresh failed with following error. The request to the list featuer available on the specified server failed
Can't get role and feature data Error_Unable to obtain feature list Error.0x8000ffff
Please help me to fix this
↧
Server Manager 2012 : Configuration refresh failed with the following error: Invalid class
When we start Server Manager on Server 2012 the flag lights up Red almost immediately with the error:
Configuration refresh failed with the following error: Invalid class.
What we’ve tried so far:
sfc /scannow [reported no errors]
Dism /Online /Cleanup-Image /RestoreHealth [Completed to 100% ]
Get-windowsfeature returns: Invalid class
This is a file/print server, running DFS. When running DFS Management from Server Manager we don’t see the Replication section at the bottom. We can run MMC and manually add DFS Management then Replication shows up.
Where do I look to start diagnosing this error?
↧
Windows Server not connecting to network
---not sure if this is the correct forum to ask this question, if it is not the correct forum, please point me to the correct forum --
We have a Windows Server 2003 R2 Standard Edition SP 2 acting as one of two Domain Controller on a Dell PowerEdge (I am not in the office right now so I do not know what model) 2.5 GHz, 4 GB RAM.
The other day I was asked by the IT department at HQ to reboot the DC server since they could not access it.
Once it was rebooted, one of the IT guys asked me to reboot it again, he got kicked out of the server and could not get back in.
I don't know what he was looking at while the server was rebooting however he told me that at one point while the server was coming up he saw that it connected to the network however it disappeared.
I can log in to the server directly, but I have not network connection even though the network connections says it is connected, there are sent and receive packets that I can see in the Network Connection properties.
There are 2 Ethernet ports (LAN connections), one was enabled and the other was disabled.
I have tried 3 different (working) network cables on the enabled Ethernet port and still can not connect to the network.
Disabled the Ethernet port (LAN Connection) that was enabled and enabled the one that was disabled and tried all three network cables and still no connection to the network.
Also, moved the cable from one port on the Cisco switch to another to see if the port was bad and still could not connect to the network.
directly connected the server to our modem, to see if the IT guy can directly connect to the server and he could not. (we changed the IP address so that he could try to remote into it)
Also ran Microsoft FIXIT program and that did not work.
I was going to try a system restore until I realized there is not system restore on Windows Server 2003.
I could be wrong on this however I believe the Ethernet port (cards) are failing. The lights Ethernet ports on the left side is a solid green light, on the right side is a blinking amber light. it is not blinking as fast as the other domain controller Ethernet port amber light.
Any suggestions would be greatly appreciated to help solve this problem.
if more information is needed please ask away.
Thanks so much,
Robin
↧
↧
NFS Mount question
Hello All,
I have this question regarding NFS Mount.
I have windows Server 2008 R2, and I am supposed to pull a folder from a Unix Box.
I have installed the "SERVICES FOR NETWORK FILE SYSTEM (NFS)" in my windows machine by going to ADMIN TOOLS -> SERVER MANGER and then ROLES and then adding the "services for NFS"
So, now I have the
CLIENT FOR NFS and SERVER FOR NFS on my Windows machine.
Do we need to anything on the Unix machine. I mean, it is a different group that takes care of the Unix server from where I need to get data from (map to).
I believe they need to share the folder \\unixserver\inter\Actual
The folder in question is ACTUAL. Does the Unix people need to do an "NFS SHARE" or something so that I can mount the folder from my Windows machine?
Or is there something else I need to do from my side?
Thanks
↧
VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C ( Not able to open disk management )
Hi,
This is happening on a Windows Server 2008 R2 SP1 server. When we try to open Disk Management it would stay there with a message " connecting to virtual disk service " and after a while the message changes to " Unable to connect to Virtual disk service ".
The disk management view stays blank with no drives shown in it. And the following error is registered in System event log -- " VDS fails to launch provider {CA7DE14F-5BC8-48FD-93DE-A19527B0459E}. Error code: 80072498@0200000C "
The VDisk service is set to manual and stopped as it is supposed to be.
An application called " PI System " is installed on the server. We noticed that if we stop the " PI Application services " and reboot the server the disk management opens up fine. Has any one faced this or a similar situation. Thanks in advance for the help :)
↧
i need a password to have administrative rights on my laptop
To whom it may concern:
My name is Pamela Turpin. I am the current owner of this laptop, which is an HP G60-243DX Notebook PC. My Uncle Ken was the first owner. He gave it to my Uncle Mike when he bought a better laptop. I am a college student, so when my Uncle Mike got a new laptop, he gave me this for school. I am having issues with the computer and I cannot resolve them because I don't have administrative rights, even though I am logged in as an administrator. It tells me I cannot get rid of dangerous add ons and other things because of this. The whole computer, including when I turn in assignments, comes up as MICHAEL/Ken. I have owned this computer for years. I need to be the only owner and have it set so that I may be able to make decisions and have my own password. I have had a lot of trouble because of this issue and I need it resolved if possible. Please get back to me as soon as possible. I would really appreciate it. Thank you for your time.
Sincerely,
Pamela Turpin
↧
Remote desktop collection option disappear
Hi,
I have installed Windows server 2012 R2 Standard edition, i want to configure Remote desktop web Access option but somehow Collection option is disappear. can you please help me?
Thanks
Vasim Tamboli
↧
↧
can´t add a roll or function
Hi, I installed a server 2012 Essentials and it worked well, but when I try to add a roll or function it says ca´t show the functions that are avalibel on the server. Coulden´t open a DISM-session. Error 0x80070032. What to do??
↧
Scheduled task won't run .bat file
Hi. On Windows Server 2008 I have a scheduled task that calls a .bat file. The fist step in the .bat file is write to a log file to the same directory in which the .bat file exists. This allows me to find out if it is ever run. When the .bat file is run from a command prompt it runs as expected writing to the log file and completing its actions. My problem is that when I run the scheduled task manually or allow it to run when scheduled it appears to run but the .bat file is never run. No log file is ever created. The History tab in the properties of the scheduled tasks shows the task being started and running then completing with an operation code of 2. I've disabled the UAC for the user account. I've set the task to run as the Administrator user and verified the permissions for that user. I know the password is correct for the task because I can make changes to the properties and save those changes with the username/password. I'm at a loss for further troubleshooting steps. Can anyone point me in the right direction to figure out why these .bat files are not being run?
↧
Problem uploading website
I am trying to upload the blogengine .net files to a domain on my windows server. After uploading the files i get serber error 500. I tried to do the same to another domain and i get "
Server Error in '/' Application.
Runtime Error
Description: An exception occurred while processing your request. Additionally, another exception occurred while executing the custom error page for the first exception. The request has been terminated.Any suggestions
↧
DCom Server Process Launcher
Please assist is there a way to stop, start or enable or disable the DCOM Server Process Launcher in Windows Sever 2008
Thanks
Kind Regards
Zakaria Khan
↧
↧
How to one computer just can log on one user acccount.
Hello Everyone
I have a system network . On the server I have installed Window Server 2k8 R2 Enterprise and 40 client
I have configured upgrade Domain and the clients joined it.
I created 40 user domain account. So, How to on the server I can configured one computer just can log on one user acccount.
Example: Computer 1: just can logon User 1 and other user account can't login on this conputer
Help me.
↧
How to a computer just can log on one user ?
I have a system network . On the server I have installed Window Server 2k8 R2 Enterprise and 40 client
I have configured upgrade Domain and the clients joined it.
I created 40 user domain account. So, How to on the server I can configured one computer just can log on one user acccount.
Example: Computer 1: just can logon User 1 and other user account can't login on this computer
Help me.
↧
what does assign on ISCSI target ?
what does assign on ISCSI target ?
Why do I need to assign an ISCSI target?
↧